Enjoy All The Benefits Of Four Products In One
Insulates and Saves Money!
· Increases energy savings year around
· Keeps homes cool in the summer & warm
in the winter
· Decreases electric bills between 25% to 40%
· Reflects heat and prevents absorption
· Insulates homes or building inside & out
· Seals small cracks
· Totally safe
· Eco-friendly
· Tax rebates are available
Use Inside!
· Specifically developed for use INSIDE or OUTSIDE your home or building
· Creates an encapsulated barrier and primer for exterior or interior paint
Use Less Paint
· Save 50% on paint because your walls will not absorb as much paint
· Most people fine one coat of paint is plenty when they use Lasto Eco Green.
How does lasto eco green create a barrier?
A specially developed insulating additive called a “high emissivity” coating is formed. As the coating dries and cures, it forms a thin film of spheres. These form a highly efficient insulation barrier insulate.
How Does Lasto Eco Green Work?
The special coating radiates absorbed solar or radiant heat back from the surface instead of retaining or absorbing the heat. It reflects incoming solar heat and inhibits the absorption of heat being conducted through interior and exterior walls, ceilings and roofs. Interior heat is reflected back into the room, reducing heating loss through a home’s walls and interior ceilings.
Is it Waterproof? Yes. It is a sealant and barrier.
What color is it? Any color you choose! Is it matte or glossy ?
The color is white, but we can match ANY COLOR you would like.
Simply provide us with the manufacturer and the number you want.
Semi-gloss finish. Finish: satin-flat (a low angular sheen)
Business Name
Where should it be used?
On cement tile, concrete, masonry, aged modified bitumen, asphalt, Bermuda tile, barrel tile, shingle *, flat decks with positive drainage, brick, block, stucco, metal, polymer membrane, sprayed polyurethane foam. and all masonry surfaces. (*always apply a test patch to asphalt shingles to check for bleeding of asphalt into coating and possible curling.)
How do you apply Lasto Eco Green?
· It’ easy! Just roll it brush it for inside and outside use roofs will be cold to touch during summers hottest days. You can paint right over it if you like.
· No primer needed - Use your own color and 50% less paint
1.888.797.4147 www.ReadySource.com wwwwww.ReadySour www.ReadySource.com
Lasto Eco Green by Ready Source
Application Substrate
Excellent adhesion to a wide range of roofing and wall substrates including: concrete, masonry, aged modified bitumen, asphalt shingle, polymer membrane, metal, sprayed polyurethane foam.
Colors White standard and pastel to ultra deep colors; semi-gloss finish: white and pastel to medium
colors are extra
Finish: satin-flat (a low angular sheen)
Vehicle type: 100% proprietary polymer no voc
Solvent type: Water soluble not to be diluted
Coating voc: 75 g/l
Flash point: Non-flammable
Total vehicle by volume: 51.2 %
Total vehicle by weight: 64.8 %
Recommended wet film: 8– 10mils
Recommended dry film: 6– 8 mils
Coverage Theoretical coverage at 8 mils is 100 sq. Ft per gallon. Material losses during application and surface porosity will vary and must be taken into consideration when estimating job requirements.
Viscosity 100 to 110 ku
Recommended 1 to 2 hours in direct sunlight; dry times may vary depending on air temperature, wind,
Dry Time and humidity.
Limitations Not for use under heavy ponding water or below grade applications.
Surface Remove all loose paint, dirt, mildew and chalk by high pressure water cleaning or other preparation methods to obtain a sound surface. Seal any windows with eco caulking for windows
Mixing Stir well and apply as it comes from the container to have uniformity.
Application Brush, roller (min 3/4” nap), or airless spray
(Spraying will cut down on insulation properties). Recommended tip size: .019 to .025.
Dirt pickup resistance excellent
Shelf life: 2 years
Packaging: 5 gallon standard and 1 gallon to 55 gallon on special order
Performance properties
Binder rhoplex
Tg, ° c -35
Pvc, % 43
Formulation ewc-48-2
Tensile strength, psi (a)
0 ° f 1000
32 ° f 460
75 ° f 250
104 ° f 270
Elongation, %( a)
0 ° f 124
32 ° f 368
75 ° f 345
104 ° f 331
Crack width at break, mils (b)
0 ° f 7-mil film (dry) 14.7
20-mil film (dry) 42. 75 ° f
7-mil film (dry) 32.2
20-mil film (dry) 90
Low-temperature flexibility, ° f
½” mandrel -30 1/8” mandrel -15
Discounts on Larger Orders the Price Above Is Per 5 Gallon Bucket CONTACT mailto:jon@readysource.com